weberjoint is a cement-based pre-mixed non-shrink grout, used for filling tile joints in wet and dry areas.
Crack free, Water resistance, External application, Easy to apply & clean, Unique esthetical style, Low shrinkage, Decorative finish, High strength, Suitable for wide range of tiles, Non-slip
Surface of application
External floor, Floor, Roof, Wall
Things to Consider:
– Mixing water ratio as per the data sheet
– weberjoint thin for joint width 1 to 4mm
– weberjoint thick for joint width 4 to 8mm
– Apply 24 hours minimum after standard tile adhesives application
– Apply 4 hours minimum after fast-setting tile adhesives application
– Apply 14 days minimum after tiling with traditional “site-mix” mortar on floors (minimum 3 days for walls)
– Substrate must be fully cured, set and dry prior to grouting
– All traces of oil or grease must be removed
– All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
– Avoid excess of water while cleaning to prevent discoloration of joints
– It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts
– Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application
